Aviom MH10f Guía de usuario descargar pdf (Pagina 68)

6416

M REAR PANEL FEATURES

6416m DC Requirements

Like most electronic devices, the 6416m will draw more than its rated

current for a very brief period of time at power up. This is called in-rush

current. This also happens when powering the unit through its DC

Backup power input. A power supply connected to this input should be

capable of sourcing 5A of in-rush current for 5ms (0.1ms rise time).

Alternately, some power supply manufacturers indicate in-rush current

sourcing capability by specifying a maximum capacitive load. In the

6416m’s case, a supply should be chosen that can handle a 2500μf load.

However, many power supplies have no specification concerning

transient current capability. In this case, a 100 watt (24V @ 4A) or greater,

power supply should be utilized. Although a 65 watt power supply is

adequate to power the 6416m, a 100 watt or greater power supply should

be capable of meeting the 6416m’s in-rush current requirements.

Both internal AC and external DC power sources can be connected

simultaneously. The AC power switch controls the AC power source

only.

A-Net Ports

Two EtherCon jacks are provided for A-Net connections, labeled A and

B. Connections can use standard RJ45-style cables or cables outfitted

with the locking EtherCon connector. Refer to the section on network

modes for additional information about using these jacks (page 17).

Balanced Mic/Line Inputs

The sixteen female XLR mic/line input jacks on the 6416m can accept

balanced mic or line-level audio signals. (Using line-level sources may

require the use of the channel pad to avoid clipping.)

   

Mic/line input jacks on the 6416m rear panel

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 143 144

Sin comentarios

Aviom MH10f Guía de usuario Pagina 68