Aviom MH10f Guía de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
54
6416
M FRONT PANEL
NOTE: To save a mic preamp Preset from the MCS, remember that
the 6416m needs to be set to the same Control Group as is
currently selected on the RCI that the MCS is connected to.
Recall a Preset
To recall a mic preamp Preset from the front panel of the 6416m, press
the RECALL button. The Recall button’s red LED, the Enter/Cancel LED,
and the Edit button corresponding to the last Preset saved/recalled
will flash. Choose the memory location that contains the desired Preset
by pressing the corresponding channel Active button. Press E
NTER to
complete the operation and load the Preset, or press the CANCEL button
to exit without recalling a Preset.
Recalling a preset will overwrite all channel parameters as described
above; save a mic preamp Preset first if you want to recall the current
settings at a later time. When a Preset is recalled, audio is muted briefly
(a few milliseconds) while the settings are changed. This is desirable,
especially when large gain changes or changes to pad and phantom
power settings are included in a Preset.
Remember that when using the MCS Mic Control Surface to recall a mic
preamp Preset, the 6416m needs to be set to the same Control Group
as the RCI/MCS combination. Using the MCS to recall a Preset causes all
6416m preamps in the same Control Group to recall the same-numbered
Preset simultaneously.
Preset Rules
When saving or recalling a mic preamp Preset from the front panel of
an individual 6416m Mic Input Module, only that module is affected. For
example, to save the channel strip settings for a 64-input system that
includes four 6416m mic modules in a network without an RCI/MCS
combination, you need to perform the save/recall operation on each
module separately.
The Control Group has no bearing on the preset save/recall function
when a preset is saved or recalled from the 6416m front panel.
When an RCI Remote Control Interface and MCS Mic Control Surface
are part of a Pro64 network, the setting of the Control Group will affect
the behavior of the save/recall functions. Only modules set to the same
Control Group can be addressed from the RCI/MCS combination.
When a Preset is saved (or recalled) from the RCI/MCS combination, all
6416m modules set to the same Control Group will save or recall the
same numbered Preset simultaneously.
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 143 144

Comentarios a estos manuales

Sin comentarios